{"id":493,"date":"2023-01-10T23:26:22","date_gmt":"2023-01-10T23:26:22","guid":{"rendered":"https:\/\/graywolfslair.com\/?p=493"},"modified":"2023-04-06T23:05:19","modified_gmt":"2023-04-06T23:05:19","slug":"10-19-190-proof-ethanol-from-scratch","status":"publish","type":"post","link":"https:\/\/graywolfslair.com\/index.php\/10-the-alchemist-resource\/10-19-190-proof-ethanol-from-scratch\/","title":{"rendered":"10.19 190 Proof Ethanol from scratch"},"content":{"rendered":"\n

Legalization of medical cannabis has enabled brothers and sisters with limited funds to legally grow their own cannabis meds without the specter of arrest, but how are they to legally and affordably extract the concentrates from that cannabis for formulation into their meds with minimal outlay?<\/p>\n\n\n\n

Two methods using GRAS solvents formerly in common use are LPG extraction and Ethanol extraction.  Due to the number of explosions, injuries, and deaths from boneheads extracting indoors at home and in motels, it is now a Class B felony in these here parts to extract cannabis using LPG outside a permitted facility.<\/p>\n\n\n\n

Permitted facilities are not in residential or high-density zones and include closed loop extraction systems, C1D1 rooms and other capital-intensive equipment, so no longer in the scope of your average brother and sister with little to no money.<\/p>\n\n\n\n

While it can still be done safely outdoors, those of us on limited budget and electing to remain legal, excludes those techniques.<\/p>\n\n\n\n

Us\u2019n includes both those morally opposed to violating the law, as well as those believing the laws poorly thought out and written, but not wishing to gamble with high legal costs and the possibility of imprisonment. <\/p>\n\n\n\n

That still leaves ethanol as a viable GRAS solvent capable of extracting the concentrates that we covet for formulating our medications.  Alas and alack, that doesn\u2019t solve the problem for brothers and sisters squeaking by financially, due to high liquor taxation, or those in areas where big brother is again protecting us from ourselves and high proof ethanol is not legally available.<\/p>\n\n\n\n

That leads us to the subject of hiring $6.75 worth of hard-working Turbo yeast and feed them about $22.93 worth of delicious corn sugar and then distilling off the gallon of ethanol waste that they excrete because they are so happy.<\/p>\n\n\n\n

$29.68 a gallon is about 3.79 Liters, or $7.83 per liter for mandatory consumables, and I spent another discretionary $1.51 for 16 oz of Star San that I used to sterilize the carboy and the citric acid that I dropped the wash pH to 4.0 with to optimize conditions.    <\/p>\n\n\n\n

I used an ounce of Star San sanitizer to sterilize the carboy before use.  I paid $19.55 for 16 oz, so that expense was $1.22 for the 5-gallon wash.<\/p>\n\n\n\n

I paid $4.70 for a pound of citric acid and used two tablespoons in the process, or about $0.29.<\/p>\n\n\n\n

There are power costs for distillation and the ethanol purity that you get from the first pass depends on what type of still you are using.  A compound refluxing still will produce azeotropic 190 proof in a single pass, but the typical pot still will produce 65% purity on the first pass and around 5 passes to get to 93% or about 185 proof.<\/p>\n\n\n\n

You can also get from 185 proof to 190 or even 200 proof using a molecular sieve desiccant that can be baked out and reused multiple times.<\/p>\n\n\n\n

One of the reasons that I selected corn sugar, or dextrose for this project, is that Turbo yeast only turns it into ethanol.  Other sugars like fruticose can turn into methanol, which is toxic.  When running other sugars, the \u201cheads\u201d or fore shot (first out) are typically tossed, due to their methanol or ethyl acetate content.<\/p>\n\n\n\n

In looking for supplies, I found everything I needed and then some online, but after checking prices went shopping here locally at F.H. Steinbart Co, where prices were actually cheaper and it helps keep our local economy\u2019s doors open, especially during this pandemic.<\/p>\n\n\n\n

As equipment expenses, I invested in a Fermonster wide mouth fermenting carboy at $32.95 and a rubber stopper with airlock at $3.80. <\/p>\n\n\n\n

I opted for the wide mouth carboy for ease of scrubbing down the interior walls during cleaning.  It is of course good for multiple batches, so the $36.75 total is amortized.<\/p>\n\n\n\n

Pick a number???  I predict I could get more than 25 batches out of the carboy, so let\u2019s call that $1.47 per five-gallon run producing 1 gallon of ethanol.<\/p>\n\n\n\n

That leaves us with $29.68 consumables plus $1.47 amortized capital, or about $31.15 per gallon.  I added another $1.51 discretionary costs, which I recommend, so lets round cost per gallon, less energy expense, as $32.66 per gallon, which is about $8.62 per liter.<\/p>\n\n\n\n

1.75 Liters of 190 proof here in the mystic land of ORE retails for about $36.95 or $21.11 per liter, most of it alcohol taxation.<\/p>\n\n\n\n

Talk to your local law professional for interpreting the laws at your specific location, but I believe that as I am using the alcohol to extract essential oils versus drinking it, and the still that I used was under one gallon capacity, I believe I did this all legally. <\/p>\n\n\n\n

The process:<\/strong><\/p>\n\n\n\n

My first step after accumulating the equipment and supplies, was to sanitize the carboy using an ounce of Star San for five gallons of water, followed by three freshwater rinses. <\/p>\n\n\n\n

\"\"<\/figure>\n\n\n\n

Sterilization using 1 oz Star San per gallons of water<\/strong><\/p>\n\n\n\n

Next I heated 5 gallons of water on my outdoor seafood boiler to 104F and stirred in the powdered corn sugar.  That dropped the temperature below my target point 70 to 82F, but only one degree, so I stirred in the Turbo yeast and checked the Ph.<\/p>\n\n\n\n

I adjusted the Ph to 4.0 adding citric acid, and then poured the mixture into my carboy.<\/p>\n\n\n\n

After adding the stopper and air lock, I set it aside to let work.  The operating temperature for Turbo yeast is 68F to 82F, and our kitchen temperature was actually at 68F, but still began to work so vigorously at about two to three bubbles per second, that it blew droplets of water out of the S bubbler air lock.  I can only imagine how vigorously it would have been at 82F. <\/p>\n\n\n\n

\"\"<\/figure>\n\n\n\n

The Wash Working<\/strong><\/p>\n\n\n\n

On the third morning, the bubbling had stopped, so I prepared to siphon it out for settling, but alas it started bubbling again as the furnace warmed the house up from 67F to 68F, so I moved it to the heat register and added towels to help direct and control the heat.  It continued to bubble at a slow rate for two more days before I decanted it. <\/p>\n\n\n\n

Note to self, make ethanol fermentation runs here in the mystical land of OR during the summer, when the temperatures are warmer.  At about 67F, the Turbo yeast falls asleep, but will tolerate up to about 86F on the high side.<\/p>\n\n\n\n

\"\"<\/figure>\n\n\n\n

Warm UP<\/strong><\/p>\n\n\n\n

Once the bubbling really stopped above 68F, I siphoned it off into half gallon jars and experimented with clarifying them.  My hydrometer showed the wash to be at 20% ethanol by volume. <\/p>\n\n\n\n

I stuck two jars in the refrigerator, two in the freezer, and tried to vacuum filter one jar as was.  The filtration as was experiment took a long time as the yeast quickly blinded my #1 lab filter, even with two commercial coffee filters protecting it.<\/p>\n\n\n\n

Refrigerating in the frig or super cold in the freezer, sped up precipitation, but not a lot and I am limited in frig and freezer space, so I ended up distilling off the ethanol from the wash as was, where was. <\/p>\n\n\n\n

It really didn\u2019t seem to matter, though it may have affected flavor, which was not one of my prime directives for this particular experiment, but more about that later.<\/p>\n\n\n\n

\"\"\/<\/figure>\n\n\n\n

Wash Without Precipitation<\/strong><\/p>\n\n\n\n

I used the Extract Craft EtOH Pro to distill off the ethanol, to complete my testing series of it and the MedXtract Essential.<\/p>\n\n\n\n

Both are vacuum assisted stills and either could have been used for this step, as could my own simple DYI pot still condenser made from a stainless salad bowl full of ice water, with a submerged copper coil reliably reclaiming already heavily taxed ethanol since about 2007.<\/p>\n\n\n\n

\n
15.7 Pot still<\/a><\/blockquote>